LUC-55 Diesel
The only diesel machine in the range. An 18 hp engine runs it where there is no mains supply, at 60–65 bales an hour. See product info about LUC-55 Diesel.
LUCTORC silage balers, chaff cutters and feed pellet machines
Ürün grupları
Makineler ve kullandıkları sarf malzemeleri
Machines for cutting, baling, sealing and pelleting, plus the film and net they run on.
Nerede üretiliyor
Üretim tesisimiz
Assembled, finished and tested at our own plant before export crating.
Her şeyi balyalayın
Tek balya makinesi, birçok yem türü
Maize silage, alfalfa, grass, straw and corn stalk all seal on the same machine. Not sure yours does? Tell us what you cut.
Maize silageWhole-crop maize, chopped and ensiled 
AlfalfaLucerne cut for protein-rich forage 
GrassFresh and wilted pasture grass 
Straw and corn stalkDry crop residue, cut before baling - Your material?Check if it is balable
Öne çıkan ürünler
Nine from across the range
Four lines, nine products. The rest of every line is on its own page.
LUC-55 Diesel
| Balya boyutu | 550 × 520 mm |
| Balya ağırlığı | 60–100 kg |
| Kurulu güç | Dizel motor, 18 hp |
| Kapasite | 7–8 t/h |
| Makine ağırlığı | 900 kg |
LUC-70
| Balya boyutu | 70 × 70 cm |
| Balya ağırlığı | 160–200 kg |
| Kurulu güç | 11 + 0.75 + 0.37 kW |
| Kapasite | 60–100 t/gün |
| Makine ağırlığı | 1.1 t |
LUC-750S
| Balya boyutu | Ø 700 × 700 mm |
| Balya ağırlığı | 200–240 kg |
| Kurulu güç | 27 kW |
| Kapasite | 120–160 t/gün |
| Makine ağırlığı | 1.6 t |
LUC-90
| Balya boyutu | 90 × 90 cm |
| Balya ağırlığı | 300–500 kg |
| Kurulu güç | 39 kW |
| Kapasite | 200 t/gün |
| Makine ağırlığı | Talep üzerine |
9Z-4.5T
| Kapasite | Up to 4.5 t/h |
| Motor gücü | 5.5–7.5 kW |
| Dizel motor | 15–18 hp |
| Makine ağırlığı | 300–330 kg |
9Z-10T
| Kapasite | Up to 10 t/h |
| Motor gücü | 18.5–22 kW |
| Dizel motor | 30 hp ve üzeri |
| Makine ağırlığı | 850–930 kg |
Press-Roller Series
| Üretim | 100–3,000 kg/h |
| Kurulu güç | 4–75 kW |
| Motor devri | 970–1.450 dev/dak |
| Modeller | 200 – 500 |
LUC-SWF-2518
| Genişlik | 25 cm |
| Rulo uzunluğu | 1,800 m |
| Renk | Yeşil |
LUC-BNW-5220
| Genişlik | 52 cm |
| Rulo uzunluğu | 2,000 m |
| Renk | Beyaz |
Uygulamalar
Complete workflow, complete solution
From standing crop to sealed bale: cut it to length, press it dense, then wrap and seal it.
1Cut the forageGrass, straw and corn stalk are cut to a set length, which is what lets the material compress properly.
2Press the baleThe baler compresses the cut forage into a dense bale, driving out the air that spoils feed in storage.
3Wrap and sealStretch film wraps the finished bale and seals it, so it can be stacked outdoors and opened one at a time.
Neden LUCTORC
Güç
Drive lines from 4 kW to 75 kW electric, with diesel and tractor PTO alternatives across the range.
Dayanıklılık
Thickened bases and enlarged gearboxes. Machines weigh 900 kg to 1,600 kg and above.
Verimlilik
Baler wrappers reach up to 200 tonnes a day; the pellet series 100 to 3,000 kg/h.
Güvenilirlik
Inclined press rollers wear the mould evenly, which is what keeps intervals long.
İşletmenizi geliştirmeye hazır mısınız?
Birlikte daha güçlü bir gelecek kuralım
Tell us the material, the daily tonnage and the power available on site. You get a model recommendation, the full specification and a quotation.
